Or-fab 87046 2012-2015 Jeep JK Vacuum Pump Relocation Kit Manual de usuario descargar pdf

3651 N Highway 89 • Chino Valley, AZ 86323

(928) 636-7080 • www.p-a-g.net

JEEP WRANGLER ( JK )

VACUUM PUMP RELOCATION KIT

INSTALLATION INSTRUCTIONS

2012

-2013 KIT# 87046

WARNING

Before you install this kit, read and understand all

instructions, warnings, cautions, and notes in this

instruction sheet and in the vehicle owner’s manual.

CAUTION

Proper installation of this kit requires knowledge of the

factory recommended procedures for removal and

installation of original equipment components. We rec-

ommend that the factory shop manual and any special

tools needed to service your vehicle be on hand during

the installation. Installation of this kit without proper

knowledge of the factory recommended procedures

may affect the performance of these components and

the safety of the vehicle. We strongly recommend that

a certified mechanic familiar with the installation of sim-

ilar components install this kit.

WARNING

Always wear eye protection when operating power

tools.

WARNING

Before you install this kit, block the vehicle tires to pre-

vent the vehicle from rolling.

2012 Vacuum Pump Relocation Kit 1 Kit #87046

Before Starting Installation

1. Carefully read all warnings and instructions com-

pletely before beginning.

2. Verify all parts have been received in this kit by

checking the parts list at the end of this document.

3. Only install this kit on the vehicle for which it is

specified. If anytime during the installation you

encounter something different from what is outlined

in the instructions, call technical support at (928)

636-7080.

4. Park vehicle on a clean, dry, flat, level surface and

block tires so vehicle cannot roll in either direction.

Remove Factory Bracket

1. Remove pump and bracket

a. Disconnect wire harness and both vacuum

hoses from vacuum pump.

NOTE

Kit parts are prefaced by the word kit and appear in

bold print.

NOTE

If parts are missing from kit, please be prepared to pro-

vide the following information:

1. Name of purchase location

2. Bar Code on side of box

3. Date above bar code

4. Date inside box cover

5. Inspector # from inside box cover

1 2 3

Indice de contenidos

Pagina 1 - Remove Factory Bracket

3651 N Highway 89 • Chino Valley, AZ 86323(928) 636-7080 • www.p-a-g.netJEEP WRANGLER ( JK )VACUUM PUMP RELOCATION KITINSTALLATION INSTRUCTIONS2012-20

Pagina 2

2012 Vacuum Pump Relocation Kit 2 Kit #87046b. Using a 10mm wrench, remove two OEM nutsfrom studs in frame bracket and remove vacuumpump from studs.

Pagina 3 - Kit Parts List

2012 Vacuum Pump Relocation Kit 3 Kit #87046f. Remove approximately 3 Ft. of factory largevacuum hose from split connector in enginecompartment near

Comentarios a estos manuales

Sin comentarios

Or-fab 87046 2012-2015 Jeep JK Vacuum Pump Relocation Kit Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Or-fab 87046 2012-2015 Jeep JK Vacuum Pump Relocation Kit. OR-Fab 87046 2012-2015 Jeep JK Vacuum Pump Relocation Kit User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Para El Coche Or-fab 87046 2012-2015 Jeep JK Vacuum Pump Relocation Kit